8 PANEL URINE DRUG TEST CUP | 1 CUP
FDA APPROVED / CLIA WAIVED
|AMP, BUP, BZO, COC, MAMP (MET), OPI300 (MOP), OXY, THC|
Ovus Medical’s 8 Panel urine drug test cup | 1 cup is a single cup kit that enables quick and accurate urine sample testing for industries and organizations. This multi-drug screen test has 8 panels on the cup to confirm or rule out the presence of the most often abused drugs.
3479 in stock
The leak-proof 8 panel drug test kit comes in round shape with a no-drip screw top lid. With an easy-to-read label, the steroid drug test kit has a temperature strip installed to validate the presence of human urine.
The cup is exceptionally alert to any sort of variation in the SAMHSA cutoff levels. However, with lower predetermined cut off levels, you can achieve an ideal urine analysis test for pain management and drug addiction screening.
With stamped 99% accuracy rate, you can use the anavar detection time urine test to effectively utilize at home, workplace or any other institutes. The fully integrated and self-contained urine screening cup comes to be handy for people. So you do not need any support to pursue the test.
Get the results as quick as less than 2 minutes or even less than that. However, for proper results, you must examine the urine specimen five minutes after the drug test has been taken. The urine specimen must be not be kept over eight minutes for analysis.
Keep the drug test kit stored within 36 degrees and 78 degrees Fahrenheit regulated conditions. Remove the seals only when ready to use.
8 PANEL DRUGS TESTED:
Drug Testing Instructions:
- Bring the 8 Panel Drug Test Cup, specimen, and/ or controls to room temperature (59-78 degrees F) before use of stored at refrigerated temperatures. Remove the cup from sealed pouch and use it as soon as possible.
- Have the donor date and initial the body label.
- Donor provides a urine specimen in the drug testing cup and screws cap on top of it. Start timer immediately.
- Operator checks the cap for tightness.
- Remove the peel-off label.
- Check the temperature strip label at 2-4 minutes after specimen collection for the fresh urine specimen. A green color will appear to indicate the temperature of the urine specimen. The proper range for an adulterated specimen is 90-100 degree F (32-38 degree C).
- Drug test results are indicated by the presence or absence of colored band(s) in the result area of the test strips. The result should be read at 5 minutes. Do not interpret the result after 8 minutes.
- Positive test results must be confirmed by another drug testing method. Send the cup and urine specimen intact to a toxicology laboratory for confirmation.
DIMENSIONS: 14 x 14 x 3 in
|Dimensions||4 × 1 × 1 in|
8 PANEL URINE DRUG 1 CUP TEST
For industries, organizations, and governments that require more extensive drug . Also, metabolite testing capabilities. 8 PANEL URINE DRUG 1 CUP TEST is a multi drug screen test. That simultaneously and qualitatively detects up to eight compounds at once. Designed ergonomically to minimize mess and prevent leaks. With an easy-to-read result’s pane, the 8 panel drug test is accurate enough for workplace drug testing. But comfortable enough for at-home use.
A rapid results drug test that is as effective as those performed in a clinical setting. 8 panel tests detect the presence of up to eight drugs and metabolites. Immunoassay technology determines whether drugs and metabolites are above SAMHSA levels within minutes. The medical grade testing cups analyze human urine specimens within a 99% accuracy rate.
12 Panel Medical 8 panel drug test includes a temperature gauge to help operators. It confirms the validity of the sample. Extending the requirements of FDA approval. 8 panel testing cups are also equipped with adulterants to ensure the authenticity of the results. Prevent the occurrence of false-negatives.
While the SAMHSA standard for urine drug tests is a 5 panel cup. It Rehabilitation facilities, medical centers, governments. The workplaces require more extensive testing resources for detecting both parent drugs and their metabolites. An 8 panel drug test is an FDA-approved. CLIA-waived multi screen drug test for testing:
12 Panel Medical produces medical grade testing cups in compliance with industry. Specifications and guidelines are suitable for use in laboratories, rehabilitation centers. Professional medical settings as well as in the workplace and home.
Whether for clinical, work, or home use. The 8 panel drug test includes the option to configure compliance figures to even stricter standards. It comes equipped with fail safe’s to prevent fraudulent results. Each urine drug test contains a precise and comprehensive set of instructions for situations. It requires adjustments and alternative settings.
complain contractions refer to the pre-determined limit for a parent drug. Metabolite found in a human urine specimen. Although SAMHSA cutoff concentrations intended as a guideline for federal employees. Their limits set based on research conducted by leaders in the field of toxicology. As such, compliancy with SAMHSA cutoff concentrations is the industry-standard. For immunoassay multi drug screen tests.
The 8 panel drug test cutoff levels determine what qualifies as a positive result. When a urine specimen exceeds the cutoffs for one or more of the drugs. Then metabolites being test for, the test marked as positive. 8 panel drug test cutoff levels expressed as nanograms per milliliter (NG/ml) and set as follows:
- Amphetamines 1000 ng/ml
- Benzodiazepines 300 ng/ml
- Buprenorphine 10 ng/ml
- Cocaine 300 ng/ml
- THC 50 ng/ml
- Opiates 2000 ng/ml
- Morphine 300 ng/ml
- Oxycodone 100 ng/ml
- Methamphetamine 1000 ng/ml
To dissuade the donor from attempting to alter the drug test via concentration levels, 8 panel rapid drug tests are equipped with a number of failsafe’s. The testing cups are exceptionally sensitive to variations in the SAMHSA cutoff levels. You may even adjust the cutoff levels in order to test for appropriate pain management versus painkiller abuse levels. Adulteration testing kits and a temperature indicator also alert operators to potentially fraudulent specimens within minutes of collection.
Extended exposure to light and air may affect the reliability of results. The testing cup should remove from packaging directly before testing. The seals can also removed at this time.
Before providing the specimen, the donor should initial and date the body label of the testing cup. After providing the sample, the operator checks that the cup tight sealed and begins a timer. Between two and four minutes, the operator should ensure that. The green temperature indicator is between 90 and 100 degrees Fahrenheit (ca. 38 °C). Five minutes after receiving the sample, the results of the 8 panel rapid drug test can read by the operator.
Operators must ensure that there is at least 15 ml of urine collected for proper analysis. Should the specimen be sent to the laboratory; most laboratories require at least 30 ml of urine. The operator is responsible for ensuring. The temperature of the 8 panel drug test cup is between 59-78 degrees F before administering the test.
Operators should also ensure that handling and disposal of human urine specimens comply. With health and safety standards applicable to their industry. Human urine has the potential to be infectious and should handle with professional care. Especially during at-home testing.
To determine whether the urine specimen exceeds the cutoff concentrations of the 8 drugs and metabolites tested, the operator consults the results indicator. Rapid results drugs tests are intended to provide quick and qualitative results. However, they cannot be relied upon if left to sit for longer than eight minutes.
If the specimen exceeds the cutoff concentrations rates for one or more of the drugs and metabolites tested, no colored band forms in the result area of the testing cup. Positive results must be sent to a toxicology laboratory for confirmation.
In the case the specimen does not exceed the cutoff concentrations rates for one or more of the drugs and metabolites tested, a colored band forms in the result area of the testing cup.
DIMENSIONS: 14 x 14 x 3 in